VenturiPulse – Water Aerator

With the Wilo-Drain TP 100E up to 3,400 l/min of ambient air can be supplied using a C suction hose and up to 4,400 l/min using a B suction hose.

Pumps such as the Chiemsee Type B also work. However, we do not yet have any measured data for these pumps, only customer feedback based on practical experience. We therefore recommend always choosing a pump with a flow rate of at least 2,100 l/min. In practice, however, we have found that the Chiemsee Type B pumps commonly used by fire departments, with a lower flow rate of 1,800 l/min, also work. We are also increasingly receiving feedback that the TP8, with a flow rate of only 1,300 l/min, works as well.

As a rule of thumb: The higher the flow rate, the more ambient air is drawn in. In addition, the pump used must have at least a Storz B coupling.

For all pumps with the same or better technical specifications than the Chiemsee B, the VenturiPulse works.

Pumps with higher specifications than the Wilo-Drain TP 100E must not be used with the VenturiPulse. Use is at your own risk. Further information can be found in the operating instructions. However, we are continuously working to test additional pump models and approve them for safe use.